AirLive WH-9000MESH Скачать руководство пользователя

Страница: 28 / 66

6.1.6 Advanced Option

There are a number of advanced options described in the following chart:

Advanced Options

Beacon interval

0 ~ 4095

The frequency in milliseconds in which the 802.11 beacon is transmitted by AP

RTS Threshold

0 ~ 3000

The number of bytes used for the RTS/CTS handshake boundary. When a

packet size is greater than the RTS threshold, the RTS/CTS handshaking is

performed

DTIM

1~65535

The number of beacon intervals between successive Delivery Traffic

Identification Maps (DTIMs). This feature is used for Power Save Mode

Basic Rate for 802.11b

1 and 2 Mbps

1, 2, 5.5 and 11Mbps

The basic rates used and reported by the AP. The highest rate

specified is the rate that the AP uses when transmitting

broadcast/multicast and management frames

Basic Rate for 802.11a, 802.11g, or 802.11b/g mixed

Basic Rate

1 and 2 Mbps

1, 2, 5.5 , 6 , 11, 12, and

24 Mbps

The basic rates used and reported by the AP. The highest rate

specified is the rate that the AP uses when transmitting

broadcast/multicast and management frames

Preamble Short/Long

Preamble

Specifies

whether

frames are transmitted with the Short or Long

Preamble.

Broadcast SSID Enabled/Disabled

When disabled, the AP hides the SSID in outgoing beacon frames

and client can not obtain the SSID through passive scanning.

Also, when it is disable, the AP doesn’t send probe responses to

probe requests with unspecified SSIDs.

6.2 Wireless Access Point – Security

Click the entry on the left hand navigation panel for

Wireless Access Point – Security. This directs you to the

Wireless Access Point – Security page.

The WH-9000MESH will display a default factory setting

of no encryption, but for security reasons will not

communicate to any clients unless the encryptions set by

administrator. You must select the wireless encryption that you want to use and click Apply. If you want

to leave the encryption set to No Encryption, chooses “None” and clicks Apply. A popup dialog box will

ask “are you sure you want to proceed to BYPASS mode?” Click OK to enter BYPASS mode with no

encryption setting.

6.2.1 WEP

WEP (Wired Equivalent Privacy) was originally designed to provide the same level of security for

wireless LANs as that of a wired LAN but is not now state-of-the-art. But the use of WEP encryption can

AirLive WH-9000-MESH User’s Manual

Содержание WH-9000MESH



































































Результаты поиска

Содержание WH-9000MESH

Отзывы:

Похожие инструкции для WH-9000MESH

Бренды по названию

Популярные бренды

AirLive WH-9000MESH, Руководство пользователя

Результаты поиска

Содержание WH-9000MESH

Отзывы:

Похожие инструкции для WH-9000MESH

Бренды по названию

Популярные бренды