manualshive.com logo in svg

AirLive WH-9000MESH, Руководство пользователя

Поделиться
Скачать
AirLive WH-9000MESH Скачать руководство пользователя страница 22

             

y

 System Time: You can manual key in the time and day, or get them automatically from NTP server. 

The 9000MESH serial products are with RTC chip to keep date and time data. It can keep system 

date and time data for 5 days. 

 

y

 Login Banner:

 

When you are satisfied with your changes, click Apply. 

5.3 System Configuration – WAN 

Click the entry on the left hand navigation panel for System Configuration – WAN. This directs you to 

the System Configuration – 

WAN page. 

The default IP of WAN is 

as static IP. You need in

the information that the AP

requires in order to allow 

the wireless devices 

(9000MESH) access to the 

wired LAN. This will be the 

IP address, Subnet Mask, 

Default Gateway, and, 

where needed, DNS1 and 2. The default WAN port value is IP Address: 192.168.254.254, Subnet 

Mask: 255.255.255.0, Default Gateway: 192.168.254.1. 

put 

 

You also can choose “Using DHCP to get an IP address”. By this way, the 9000MESH will get an IP 

address from DHCP server.   

Click Apply to accept changes. 

 

5.4 System Configuration – LAN 

Click the entry on the left hand navigation panel for System Configuration – LAN. This directs you to the 

System Configuration – LAN page. 

 

 

 

 

 

 

 

 

 

 

AirLive WH-9000-MESH User’s Manual 

21

Содержание WH-9000MESH



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды