AIRLESSCO 1200G, Руководство по эксплуатации и обслуживанию

Страница: 13 / 32

13
REV-TIP
™
SIZE SELECTION CHART
PATTERN WIDTH
Thickness of the paint coat per stroke is de ter mined by
spray tip "fan width", rate of the spray gun move ment, and
the distance to the surface being sprayed. Airlessco "Wide
Pattern" spray tips offer fan patterns up to 18-24" wide for
optimum coverage speed. Due to the fi ne atomization at
the edge of the spray pattern on Wide Pattern tips, they
may not be the best choice for exterior use when wind
is present.
SPRAY TIP SELECTION
Two tips having the same tip size, but different pat tern
widths will deliver the same amount of paint over a dif fer ent
area (wider or narrower strip). A spray tip with a narrow
pattern width makes it easy to spray in tight places.
SPRAY TIP REPLACEMENT
During use, especially with latex paint which is very
abrasive, high pres sure will cause the orifi ce to grow larg er.
This de stroys the spray pat tern. Replace tips before they
become excessively worn.
Worn tips waste paint, cause overspray, make cut ting-in
dif fi cult. They can effect sprayer performance too because
the volume of paint going thru a "blown out" tip can be
greater than the pumps maximum output capacity.
Spray tip selection is based on paint viscosity, paint
type, your pumps output capabilities, and job needs.
For light viscosities (thin paints), use a smaller tip;
for heavier vis cos i ties (thicker paints), use a larger
tip size.
Going to larger spray tip sizes is dependent on how many
gallons of paint per minute can be sprayed by your pump
Do not use a tip larger than the max i mum pump fl ow rate
or capacity the spray er can ac com mo date. Pump fl ow
rate is mea sured in gallons per min. (GPM), or where
appropriate, liters per min. (LPM).
SPRAY PAINTING TIP - ORIFICE SIZE
(Inches)
(water @ 2000psi, 138 bar)
(latex paint @ 2000psi,
138 bar/1.36 spec. gr.)
*Pump will support tip worn to next larger size.
Water Flow Rate (gal./min.) .12 .18 .24 .31 .38 .47 .57 .67 .77 1.03 1.31 1.63 1.80
(liters/min.) .49 .69 .91 1.17 1.47 1.79 2.15 2.54 2.96 3.90 4.98 6.17 6.81
Paint Flow Rate (gal./min.) .10 .15 .21 .27 .33 .40 .49 .58 .66 .88 1.12 1.39 1.54
138 bar/1.36 spec. gr.) 138 bar/1.36 spec. gr.)
(liters/min.) .38 .57 .79 1.02 1.25 1.51 1.85 2.20 2.50 3.33 4.24 5.26 5.83
Pump Minimum (gal./min.) .25 .25 .33 .40 .50 .60 .75 .88 1.0 1.25 1.5 2.0 2.2
Output*
(liters/min.) 1.0 1.0 1.25 1.5 1.9 2.3 2.8 3.3 3.8 4.7 5.7 7.5 8.2
REV-TIP
TM
for Painting
Fan Width (12” from surface)
in. (mm)
.007 .009 .011 .013 .015 .017 .019 .021 .023 .025 .027 .031 .035 .039 .041
4-6 102-152
209 211 213 215 217 219 221 223 225 227 229
6-8 152-203 307 309 311 313 315 317 319 321 323 325 327 335
8-10 203-254 409 411 413 415 417 419 421 423 425 427 431
10-12 254-305
511 513 515 517 519
521 523 525 527 531 535
12-14 305-356 611 613 615 617 619 621 623 625 627 631 635 639 641
14-16 356-406 715 717 721 739 741
16-18 406-457
815 819 821 831
20-24 508-610 W21 W23 W25
Gun Filter
C = Coarse
F F F
F,C C C C C C REMOVE FILTER
F= Fine
Wood Lacquer, Varnish
• •
Interior Interior Interior
Stain, Sealer
•
• •
Enamel
• •
Wood
Exterior Stain
•
•
Exterior
Vinyl, Acrylic, Latex
• •
Masonry vinyl,oil-base alkyd
•
•
Latex, Acrylic
•
• •
•
Block Filler
•
• • • •
• • •
Elastomer
•
•
•
• • • • •
Ceiling
Hi Build, Mil White
•
•
Structural Steel
Heavy Coatings
•
• •
• • • • •
. 029
NEW
WIDE PATTERN REV-TIP REV-TIP
►