EN
22
www.airfonix.com
Operation
Using the Remote
Using the IR Extender
Power Button:
Press to power your
T Series
ON or OFF.
Mute Button:
Press to mute or unmute the audio.
Source Button:
Press to switch between audio sources connected
to the SPDIF (digital) or AUX (analog) input sources. NOTE: audio
sources must be powered on.
Pairing Button:
Use to pair
R Series
with
T Series
. See
page 13.
Button:
Press to increase the volume by 1 decibel. Hold
to continuously increase volume.
Volume – Button:
Press to decrease the volume by 1 decibel. Hold
to continuously decrease volume.
The remote is shipped with a thin plastic insert which prevents the
battery from charging until ready for use. Firmly pull the plastic tab
to remove insert and activate battery.
To use, point the remote at the IR Sensor on the top of your
T Series
and press desired button. The remote will function properly up to 15
feet away and facing the IR sensor within a range of +/– 30 degrees.
T Series
The included IR extender allows you to hide your unit or put it inside
a cabinet.
Plug the IR extender into mini-jack on the top of your
T Series
and
position the IR sensor so it is in direct line of sight. The
T Series
remote will control volume levels and mute of your
T and R Series
and the components connected to them, even when all the units are
not in line of sight.
Power
Mute
Source
Pairing
Vol -
Vol +
IR Sensor
