EN
17
www.airfonix.com
Connecting the Receivers
Scenario 1:
Connect One AFX-19AR050 Passive Receiver to 4 ohm, 25W One Zone, Stereo
Scenario 1:
Connect One AFX-19AR050 Passive Receiver to 8 ohm, 25W One Zone, Stereo
Scenario 2:
Connect Two AFX-19AR050 Passive Receivers to 4 ohm, 50W One Zone, Mono
You may use up to two Airfonix
R Series
wireless receivers with each
T Series
transmitter. This is useful
when the speakers are spaced far apart. Follow the installation diagrams for the six scenarios. Make sure
to set the correct zone codes for your installation.
AFX-19AR050:
Designed for use with semi-pro or home audio equipment. Use speaker cables to
connect either two passive speakers at 25W per channel or one passive speaker at 50W per channel with
banana plug connectors.
AFX-19PR001:
Designed for use with professional active speakers. Connect using XLR audio cables or
RCA stereo audio jacks.
IMPORTANT:
Your system will not work properly unless the dip switches on each unit are set to the
correct positions for your installation. See Setting Zone Codes on page 14 for more information.
!
IMPORTANT:
Make sure all your equipment is unplugged from the power source
and all volume, level and gain controls are lowered before making connections.
!
SW OFF
L
R
R
DC IN
24V
ON
L
R
L
R
speaker cables
Zone Code:
Setting
OFF
ON
SW OFF
L
R
R
DC IN
24V
ON
L
R
L
R
speaker cables
Zone Code:
Setting
OFF
ON
SW OFF
L
R
R
DC IN
24V
ON
L
R
speaker cables
SW OFF
L
R
R
DC IN
24V
ON
L
R
speaker cables
LEFT
Zone Code:
Setting
OFF
ON
RIGHT
Zone Code:
Setting
OFF
ON
