EN
16
www.airfonix.com
Preparing Components for Use
Preparing for Outdoor Use
Install External Antenna
The receivers are designed with a rugged, weatherized industrial
chassis for outdoor use. In addition, we have included rain covers
with each
R Series
receiver. These are designed to extend over the
wires to protect them from direct contact with water.
Before connecting your speakers, turn the receiver upside down
and fit the rain cover into the inside slots on each side. Slide it into
place.
NOTE:
The rain covers may also be used in indoor installations to conceal connections and create a cleaner look.
Connect the supplied external antenna to the SMA jack on the top
of each unit and turn clockwise to screw into place.
The antenna folds down to a 90 degree angle and rotates 180
degrees at the base to adjust for better reception.
