EN
21
www.airfonix.com
Connecting the Transmitter
Connecting Transmitter to One Source
Connecting Transmitter to Two Sources
Unplug the power to the audio components before making any of these connections. Depending on the
audio inputs on your audio source, select one of the following methods for connection:
When you have finished, plug your transmitter and the audio sources into the AC outlet and turn them on.
You may use one audio source at a time. Power on the desired audio source and press the POWER button
on top of your
T Series
to power it on. Push the SOURCE button to switch between SPDIF (digital) and AUX
(analog) sources. The corresponding green LED indicators light when each source is selected.
You may also use the remote control to power on and switch sources. See page 22.
NOTE:
You may only switch between an audio source connected to one of the analog input sources (Hi-Level In,
Balance In or RCA L and R inputs labeled AUX) and another audio source connected to the digital input source (SPDIF).
Follow the directions above for connecting to one source to connect a second audio source to your
transmitter.
Digital
OR
Analog
L
R
AUDIO
TRIM
EXT
IR
DC IN
9V
INPUT
SPDIF
AUX
HI-LEVEL IN
L
R
SW OFF
ON
OR
speaker cables
(SPDIF)
COAXIAL
DIGITAL OUTPUT
OPTICAL
ANALOG OUTPUT
L
R
L
R
HI-LEVEL
optical cable
coaxial cable
RCA audio cables
AUX
L
R
BALANCE IN
R
L
SPDIF
DC IN
9V
SW OFF
ON
(SPDIF)
COAXIAL
DIGITAL OUTPUT
OPTICAL
ANALOG OUTPUT
BALANCED
L
R
L
R
OR
Digital
OR
Analog
XLR audio cables
RCA audio cables
coaxial cable
optical cable
AFX-19PT002
AFX-19PT102
IMPORTANT:
Your system will not work properly unless the dip switches on each unit are set to the
correct positions for your installation. See Setting Zone Codes on page 14 for more information.
!
Set the Zone Codes For Your Installation:
OR
OR
Zone Code:
One Transmitter
with One Receiver
One Zone
Setting
OFF
ON
Zone Code:
One Transmitter
with Two Receivers
One Zone
Setting
OFF
ON
Zone Code:
One Transmitter
with Two Receivers
Two Zones
Setting
OFF
ON
