MENU 02 - HW SETTING
MENU 06 - FILTER TIMER
06 - Filter timer
50 - Factory reset
08 - AQS Sensor
Digital input (15-16)
fire input
You can choose
the logic of the
RUN contact
You can choose the
contact to switch the
PIR sensor or the
FIRE contact
This menu lets you set the logic using the digital input and RUN output.
•
Input (15-16) – Lets you choose to control the unit with the movement
sensor or as a fire contact. In case of fire, the behavior of the unit can
be set (settings in service menu no. 09)
•
Output (7-8) – Lets you set the logic of the RUN contact switch as
follows: N.close (normally closed) or N.Open (normally open)
Status to notify
filter clogging
control
Set the
maximum
number of hours
to notify filter
clogging control
(depends on the
environment of
the installation)
Reset filter
clogging control
timer (use when
changing the
filter)
MENU 07-EXCHANGERS
03 - Filter timer
04 - AQS Sensor
05 - Temperature sensor
06
08
09
Preheating:
No
Electric
Water
Reheating:
No
Electric
Water
Change over
Direct vaporizer
20
INSTRUCTION MANUAL
Susurr
TM
