Ensure a uniform inflow and free outlet!
During operation of a fire place in ventilated room, sufficient
air supply must be provided in all operating conditions (please
contact chimney sweep).
Valid local regulations and laws must be observed!
QuietAir 150 VS is not to be used by children and persons with
reduced physical, mental or sensory capacities, without
proper practical experience or expertise, unless they are
controlled or instructed on the product operation by the
person(s) responsible for their safety. Children are not allowed
to play with the device. Cleaning and maintenance must not be
carried out by children without supervision.
1.3
Warranty claims
– Disclaimer
All versions of this manual must be observed; otherwise the guarantee will be
annulled. The same applies to liability claims against Airflow Developments. Use of
accessories which are not admissible and are not provided by Airflow Developments
- is prohibited. Any potential damages are not subject of the guarantee. Changes
and modifications to the product are not allowed and will result in a loss of conformity
- in such case any warranty and liability shall be excluded.
1.4
Regulations
– Guidelines
Properly installed and used for its intended purpose, product complies with the valid
regulations and CE-guidelines at the time of its production.
1.5
Transport
The fan is factory-packed so that it is protected against normal transport loads. Run
the transport carefully. It is recommended to leave the fan in the
manufacturer’s
original package.
1.6
Acceptance of delivery
A visual inspection upon delivery should be performed including damage and type
accuracy check. In the event of there being damage, the necessary notification of
claim
immediately has to be reported to the carrier. Any delay in complaint will result
in a loss of benefit entitlement.
1.7
Storage
When storing for a long period of time, avoid harmful impacts by following next steps:
protect the motor by dry, air and dustproof package (plastic bags with drying agent
and moisture indicator). The product should be stored in a vibration-free and water-
protected premise at a constant temperature ranging from -20
C up to + 40
C.
In compliance to Chapter 8, when storing a product for more than three months
(motor standstill), maintenance must be determined before commissioning. In case
of transshipment (especially over longer distances: e.g. sea), the packaging has to
be checked whether it is suitable for transport and route. Damages caused by
improper transportation, storage or installation are not covered by the warranty.
