CR12 - CR165 50/60Hz
CONDENSERS
Construction
Unit cabinets are manufactured from galvanised sheet steel coated with epoxy baked powder paint to provide a durable
finish.
Standard unit colour shall be Light Grey (RAL 7035).
Dual position fixing legs are supplied attached to the unit via captive bolts and shake proof washers.
Horizontal Air Discharge
As standard, unit legs are attached and delivered in the horizontal air discharge mode as are the isolator and fan speed
controller.
The legs attached to the top of the unit are for lifting and stacking and may be removed and stored safely if not required.
General Description
IMPORTANT
Only 2 units may be stacked together.
Vertical Air Discharge
As standard, unit legs are attached and delivered in the horizontal air discharge mode and can be repositioned on site to
offer vertical air discharge mode.
IMPORTANT
To ensure the unit isolator and fan speed controller are in the correct orientation for vertical air discharge please specify
at order.
Condenser
Large surface area coil is ideally positioned to optimise airflow and heat transfer, manufactured from refrigeration quality
copper tube with mechanically bonded aluminium fins.
The copper tube is internally rifled for improved heat transfer.
Factory pressure tested to 45Bar.
Sweat copper pipe for brazed connection as standard.
7
Condenser Technical Manual 6666879 V1.2.0_05_2013
Introduction
