Aircel DHT-100, Инструкция по установке и эксплуатации

Страница: 2 / 36

2
WARNING!
General Safety Procedures
• Improper installation, operation, service or maintenance may contribute to conditions
in the work area or facility that could result in personal injury and product or property
damage. Check that all equipment is properly selected and sized for the intended use.
• Consult and comply with national and local codes relating to fire or explosion and all
other appropriate codes when determining the location and operation of this equipment.
• Safe and efficient operation of the unit depends on proper installation and service.
• Authorities with jurisdiction should be consulted before installing to verify local codes and
installation procedures. In the absence of such codes, install unit according to the National
Electric Code, NFPA No. 70-latest edition.
• A qualified installation and service agent must complete installation and service of this
equipment.
• DO NOT weld on / to pressure vessel or modify it in any way.
• DO NOT remove, modify, or adjust protective or safety devices.
• Lock out power supply and depressurize system before performing maintenance or service
work.
• DO NOT operate the equipment with the control panel door open.
Notice: For optimum performance, use only original equipment replacement parts.
Notice: For information and notes specific to a custom designed and built dryer, reference the
drawing package provided with the unit.
Aircel DHT Series - Models 20 - 125