Aircatglobal VirtualFly SOLO-G1, Руководство пользователя

Страница: 14 / 20

14
6. MULTIPLE SOLOFLIGHTPANEL OR MULTIPLE MFS/P3D COMPUTER IN THE SAME NETWORK - SOLO-G1 USER'S MANUAL
6. MULTIPLE SOLO-
FLIGHTPANEL OR
MULTIPLE MFS/P3D
COMPUTER IN THE
SAME NETWORK
If you connect more than one SOLO-G1 to the same network, you should
be aware that to use them simultaneously you should have more than
one computer using MFS/P3D connected to the same network and indi-
cate the right "MFS/P3D computer" to each SOLO-G1, as detailed below.
• To connect a "MFS/P3D computer" to one of the SOLO-G1, you just
have to turn on the SOLO-G1 which you want to connect. Then, when
you execute VFConnect3, it will detect the active SOLO-G1 and will
connect it.
• Once the "MFS/P3D computer" and SOLO-G1 are connected, they
will remain connected during the session. At this point, if a second
SOLO-G1 is turned on and a second "MFS/P3D computer" runs
VFConnect3, this will just detect the SOLO-G1 which is free and will
connect.
• You should take into account that never a connection between a spe-
cific SOLO-G1 and "MFS/P3D computer" is saved, Connections are
made automatically when VFConnect3 starts and it finds a SOLO-G1
which is available (free of connection to a "MFS/P3D computer").
• If you want to prevent a SOLO-G1 to connect to another "MFS/P3D
computer", or make sure that a SOLO-G1 will always connect to the
same "MFS/P3D computer", connect them directly without going via
the LAN.