Aircatglobal VirtualFly SOLO-G1, Руководство пользователя

Страница: 15 / 20

15
7. TROUBLESHOOTING - SOLO-G1 USER'S MANUAL
7.1. ANOMALY: The "VFConnect" pluggin in MFS/P3D computer displays
“Connection Status: Searching…”
7. TROUBLESHOOTING
POSSIBLE
CAUSE 1
Network cable nº 3 is not connected.
SOLUTION
Check connection of network cable nº 3 between SOLO-G1 and MFS/
P3d PC
POSSIBLE
CAUSE 2
MFS/P3D is not running
SOLUTION Execute MFS/P3D
POSSIBLE
CAUSE 3
FSUIPC is not installed
SOLUTION Install the FSUIPC. See chapter 2
POSSIBLE
CAUSE 4
“VFConnect.exe” is not executed
SOLUTION
Execute “VFConnect.exe” on the MFS/P3d PC. Is better to execute
“VFConnect.exe” once MFS/P3D is loaded
POSSIBLE
CAUSE 5
Windows firewall does not allow communication to SOLO-G1
SOLUTION You will have to add an exception manually to allow communication. For
that, follow the steps below:
1. Press combo key W R
2. Write “firewall.cpl” on the window that has appeared.
3. A Windows firewall window should appear.
4. Depending on your windows version:
a. Windows XP: On the exceptions tab, there is a list where you should
find VFConnect, check the check box to allow that it connects. If
VFConnect is not on the list, press “Add a program” button and
explore to the desktop and select “VFConnect.exe” file.
b. Windows Vista: On the window that has appeared, on the left side
press “Allow a program through the Windows Firewall”. Search
VFConnect on the list and make sure that the check box on the
“Public” column is checked. If VFConnect is not on the list, press
“Add a program” button and explore to the desktop and select
“VFConnect.exe” file from the desktop.
c. Windows 7/8/10: On the window that has appeared, on the left side
press “Allow a program or a feature through the Windows Firewall”.
Search VFConnect on the list and make sure that the check box
on the “Public” column is checked. If VFConnect is not on the list,
press “Add a program” button and explore to the desktop and select
“VFConnect.exe” file from the desktop.
POSSIBLE
CAUSE 6
PC has more than one network card
SOLUTION If you are using a PC which has more than one network card, try one of
these options:
1. If you are trying to use one network card to connect to your router and
another one to connect directly to SOLO-G1 and it does not work, try
connecting SOLO-G1 directly to your router instead of connect to the
pc. This way, connection will be established through the network LAN.
2. If you have connected SOLO-G1 directly to your PC and your PC has
the other network sockets free, try connecting SOLO-G1 to the PC using
another network card.
POSSIBLE
CAUSE 7
Network problems
SOLUTION If you have connected your PC and SOLO-G1 directly (without router), at
the beginning you will have to wait some time, even more than a minute,
because Windows set IP addresses automatically.
If after a few minutes the connection is not established, try the next:
Make sure that IP configuration is in DHCP, for that:
1. Press W R key and on the window that will appear, write “ncpa.
cpl” and press enter.