Aircatglobal VirtualFly SOLO-G1, Руководство пользователя

Страница: 9 / 20

9
3. START UP THE SOLO-G1 - SOLO-G1 USER'S MANUAL
• If you have the Windows FireWall activated, a warning permission to
communicate with networks appears, you must click "Allow Access".
• Once the connection is established, you should see an image like
the second.
• At the top “This Computer” indicates if the software MFS/P3d is de-
tected. Only "Connected" will appear when you have initiated MFS/
P3d.
• At the bellow “Client Connection Status” indicates the connection
with the SOLO-G1.
If you see the message "Searching..." on the “Client connection status”,
carefully read the Chapter 7 in the "SOLO-G1_User's Manual" found on
the memory stick.
DEACTIVATING THE SOLO-G1
• Press the black push-button (F) on the back of the SOLO-G1 to deacti-
vate the operating system. Wait for "Windows" to completely stop.
• Once "Windows " is stopped, disconnect the red switch (2) on the
back.
In this case
the pluggin is
searching the
MFS/P3d and
the SOLO-G1
In this case
the pluggin is
connected to
MFS/P3d and
the SOLO-G1
F
2