Air Torque AT045U, Монтаж и эксплуатация

Страница: 19 / 53

EB AT-RP-4GU EN 6-1
Start-up
6 Start-up
The work described in this section is only to be performed by
fully trained and qualified personnel.
Risk of personal injury during actuator air exhaust.
In case of pneumatic version the actuator is operated with air.
As a result, air is exhausted during operation.
Î
Install the air exhaust components in such a way that
exhaust ports are not located at eye level and the actuator
does not discharge at eye level in the work position.
Î
Use suitable silencers and vent plugs.
Î
Wear eye and hearing protection when working near the
actuator.
WARNING
!
Risk of personal injury through incorrect operation, use or
installation as a result of information on the actuator being
illegible.
Over time, markings, labels and nameplates on the actuator
may become covered with dirt or become illegible in some
other way. As a result, hazards may go unnoticed and the
necessary instructions not followed. There is a risk of personal
injury.
Î
Keep all relevant markings and inscriptions on the device
in a constantly legible state.
Î
Immediately renew damaged, missing or incorrect name-
plates or labels.
Verify the compatibility and connect the actuator to the pres-
sure supply line and/or to the control system, if any, with fit-
tings and pipes as per actuator model and plant specifica-
tions.
WARNING
!