Air Techniques ScanX B7300, Инструкция по эксплуатации

Страница: 8 / 24

8
I M P O R T A N T I N F O R M A T I O N
Correct Usage
K
Operation of the ScanX may only be carried out by suitably qualified
personnel.
K
The ScanX is only to be used in the processing of exposed PSPs.
K
The ScanX should be used in a room equipped for it.
K
Room temperature should be in the range 50 to 105°F (10 to 40°C)
with relative humidity between 5 and 95%.
K
If the device is brought into the room of operation from a cooler
environment, condensation can build up. Do not connect the device until
it has warmed up to room temperature and is absolutely dry.
K
This room should be free of all possible interferences (e.g. strong magnetic
fields), as these could affect the operation.
K
The ScanX may only be operated together with authorized software.
K
Correct usage includes observing all installation and operating instructions
and adherence to the set-up, operation and maintenance instructions.
K
Any use, above and beyond that described in this manual as correct
usage, will invalidate the warranty.
Incorrect Usage
K
Any use that is not described in this manual as correct usage is considered
as incorrect usage. The manufacturer is not to be held liable for any damage
caused as a result of incorrect usage. The operator bears all risks.
This manual provides the information necessary for the setup, operation and routine
care and maintenance of the ScanX
®
12 Digital Imaging Systems with In-Line Erase,
P/N B7300.
This manual is not to be used as a replacement for training in radiography.
For information regarding the computer system and imaging software, refer to the
appropriate documentation provided with your computer hardware and software.
P U R P O S E O F T H I S M A N U A L
The ScanX is a digital radiography system that utilizes reusable Phosphor
Storage Plates (PSP) in place of X-ray film to produce diagnostic quality digital
radiographs. The ScanX produces a digital image by scanning PSPs, which have
been exposed to X-rays. The ScanX allows computer storage, processing, retrieval
and display of the computed radiographic images utilizing a user supplied software
and computer. An additional feature of the ScanX consists of an in-line plate eras-
er function that removes the latent image from the plate immediately after scan-
ning. This design provides an efficient one-operation scanning and erasing
process leaving the user with a PSP ready for the next X-ray procedure.
S Y S T E M D E S C R I P T I O N