Air Techniques ScanX B7300, Инструкция по эксплуатации

Страница: 11 / 24

11
System Properties.
If unsure of the operating system version installed,
check that it meets the necessary requirements by
checking the S
Syysstte em m P Prro op pe errttiie ess window.
This is done simply by right clicking the M Myy C Co om mp pu utte err
iicco on n.. Selecting P Prro op pe errttiie ess from the menu list displays the
S Syysstte em m P Prro op pe errttiie ess window as shown. The installed oper-
ating system version is listed under the G Ge en ne erra all T Ta ab b..
The S Syysstte em m P Prro op pe errttiie ess window can also be displayed
from the Desktop
S Stta arrtt
button. Just press the
S Stta arrtt
button
and select S Se ettttiin ng gss C Co on nttrro oll P Pa an ne ell and then S Syysstte em m..
C O M P U T E R S Y S T E M R E Q U I R E M E N T S
C O N T R O L S A N D I N D I C A T O R S
ALLPRO
IMAGING
READY ERASER
FLASHING
OFF
ALLPRO
IMAGING
READY ERASER
FLASHING
OFF
READY
Switch
FLASHING OFF
Blue LED
Indicator
ERASER
Switch
Ready/Standby
Green LED
indicator
K Ke eyyp pa ad d C Co on nttrro oll P Pa an ne ell
READY Switch Toggles between the Standby and Ready mode as follows:
1. Press to switch from the Standby mode to the Ready mode.
2. Press and hold down for at least 2 seconds to switch to the
Standby mode from the Ready mode.
Ready/Standby
Green LED indicator Illuminates green to indicate that the ScanX is Ready for operation.
When extinguished, it indicates that the ScanX is in the Standby mode.
ERASER Switch Toggles between turning the Erase function OFF and ON. This switch
has n
no o effect once the plate scanning or erasing starts.
FLASHING OFF
Blue LED indicator Illuminates steady blue to indicate that the Erase function is ON and
PSPs will be erased after scanning.
Flashes blue to indicate that the Erase function is OFF and PSPs will
n
no ott be erased after scanning.
4 4 S Scca an nn ne err T Trra acckk IIn nd diicca atto orr LLE ED Dss
Illuminate green when the Scanner has been activated, indicating
that a PSP can be fed into the ScanX.
Illuminate yellow, indicating the PSP has been sensed and the
Scanner is transporting the PSP.
Keypad Control Panel
Scanner Track
Indicator LEDs