Air Techniques A6350-15, Руководство по установке

Страница: 26 / 31

Air Techniques, Inc . Page 24
Equipment Setup
5.11 Scissor Arm Tension Alignment
The balance and spring tension of the scissor arm is initially set at the factory . During the installation pro-
cess, check the balance and spring tension .
Arm should be steady in all positions, If adjustments are necessary, follow the adjustment procedure
below .
1 . Place the scissor arm 32 .5 degree from horizontal arm as shown in the first image below .
When the angle is correct the tool will guide into the arm easily .
* Note : Generator scissor arm should be vertically .
2 . Insert the 350 mm long 5 mm allen key and turn clockwise to increase tension .
3 . Place the scissor arm straight as shown in the second image below .
4 . Insert the 350mm long 5mm allen key and turn clockwise to increase tension .
1
2
3
4