Air Techniques A/T2000 XR, Руководство по обслуживанию, Страница: 3 / 60

3
Purpose
This document provides the instructions necessary to perform repair and maintenance of the
AT2000 XR Automatic Film Processor. It is intended for all recognizable field servicing of the
unit and includes procedures to disassemble the unit to access internal components as well
as steps necessary to perform preventive maintenance, inspection, cleaning, troubleshooting
and removal/replacement of defective parts.
This manual is
not intended for the routine use of the AT2000 XR Film Processor. Refer to
the Operator's Manual shipped with the product for all processor operation. It is further
understood that repair and maintenance information provided herein is to be performed by a
trained servicing technician.
Power Removal
Prior to performing the procedures contained in this document, turn off power switch by placing
the rocker switch on the top of the unit to the OFF (0) position. Also disconnect the line cord
from the wall outlet and the communication cable from the Scanner.
Warnings and Caution Statements
In these instructions, the following definitions Apply for all WARNINGS and CAUTION
Statements:
Warnings: Any operation, procedure or practice, which, if not strictly observed, may result in injury
or long term health hazards to personnel or patients.
CAUTIONS: Any operation, procedure or practice, which, if not strictly observed, may result in
destruction of equipment or loss of treatment effectiveness.
Task Guidelines
Personnel performing maintenance and repair tasks contained in this manual should follow
standard industry guidelines for working on electronic equipment as necessary. These
include the following:
q
Always use a clean well-lit work area with ample space required for the size of the job.
q
Always make sure to protect finished surfaces from scratches or other damage by
using cushioning material such as a soft cloth or packaging material between the
finished surfaces and the area that may cause damage.
q
Keep all attaching hardware and fastening screws together with the associated
removed assembly. If necessary use separate storage containers or envelopes for
each hardware group.
q
Prior to removing any part or assembly, note location and orientation of assemblies
being removed.
q
Tag wires and associated mating connectors before disconnecting.
q
Use care when disconnecting mating connectors so as not to damage the connector
keys and connection to the associated printed circuit board, wire or cable.
q
Be aware of the damage impact of electrostatic discharge (ESD) on electronic devices
and use ESD precautions when handling printed circuit boards and wiring comprising
the Scanner.
INTRODUCTION