2 Preparation before Installation
Fig. 3-2 Attaching the Switch to a 19-inch rack
Desktop Installation
Ether-FSH2402GT
Fast Ethernet Switch has four rubber pads attached on each corner of its
underside. These pads serve as cushionings against vibration and prevent the switch from sliding off
its position. They also allow adequate ventilation space when you place the switch on top of another
device.
Fig. 3-3 Desktop installation
•
The location you choose to install your switch and the way you configure your network
may greatly affect its performance.
Installation Site Preparation
You can mount
Ether-FSH2402GT
Fast Ethernet Switch either on desktop or on a 19-inch rack. If
you plan to mount the switch on desktop, please choose a steady, level surface in a well-ventilated
area that is free from excessive dust. In any case, the installation site chosen for your switch has to
comply with the following requirements:
•
The surface where you want to mount the switch must be able to sustain at least 2.7 kg.
•
Do not place heavy objects on top of the switch.
•
The location must preferably be free from excessive dust, away from heat vent, hot-air exhaust
and direct sunlight.
10
Ether-FSH2402GT Gigabit Ethernet Switch User’s Manual V1.0
