5 Management Software Guide
Read the VLAN table registers. If you can have configured VLAN but it doesn’t show on the table,
please press the button
Add VLAN button
Click the ADD VLAN button will pop up a configuration window below. Select port base or tag
base VLAN, then check the port where you want to configure the settings. For Tag Base VLAN,
please enter a VLAN ID number.
Port Tagging Control button
Press this button you will see a dialog like follows. To configure a port, please double-click the port
you want to configure.
Please make sure to “Save VLAN” after configuration. If the VLAN settings is wrong, it can cause
user not enable to enter the switch’s management. In this case, simply reset the switch to factory’s
default.
Vlan Control Submenu
Setting VLAN Control Registers.
25
Ether-FSH2402GT Gigabit Ethernet Switch User’s Manual V1.0
