2 Preparation before Installation
The Front Panel
The front panel is where you can find the twenty-four 10/100Mbps station ports , 2 Gigabit Ports,
and the LED indicators. For the technical specifications of the ports, please refer to
Appendix A,
Product Specifications
for detailed information. For information concerning LED indicators, please
refer to
Chapter 4, LED Indicators
.
Power LED
Station Port LEDs
Station Ports
Gigabit Ports
DIAG LED
Fig. 2-2 Front Panel
Reset Button
The Ether-FSH2402GT Features a reset button that can restore the switch settings back to factory’s
default value. Please press this button if your management software have problem detecting the
switch or if the switch is not functioning correctly. The reset button is located near the center of the
back panel.
Fig 2-3 The Reset Button
The Rear Panel
The rear panel is where you can locate the power switch and AC power connector.
Power Switch
You can turn the power switch on /off to activate/deactivate the Switch. To turn on the Switch, press
the switch to the ON position. To turn off, press the switch to the OFF position.
7
Ether-FSH2402GT Gigabit Ethernet Switch User’s Manual V1.0
