Air Liquide Respireo N, Руководство пользователя

Страница: 9 / 48

10 - PRESSURE/OXYGEN PORT
If additional oxygen and/or a pressure reading is required, use the port on the main body (b).
Open the cap (d) on the port by lifting upwards and insert the oxygen/pressure tube firmly into the port.
11 - TROUBLE-SHOOTING CHART
12 - DISPOSAL INSTRUCTIONS
The components of the mask are made of the following materials and must be disposed of in
accordance with the applicable laws.
COMPONENT MATERIAL
Main body Polycarbonate
Elbow Polycarbonate
Forehead rest Silicone
Cushion Silicone
Cap Silicone
Headgear Nylon/Polyurethane
13 - TECHNICAL DATA
Normative references CE marking in accordance with European Directive 93/42/EEC,
class IIa and subsequent amendments. EN ISO 14971, ISO 5356-
1, ISO 10993-1, EN ISO 17510-2
Operating pressure 4 – 24 cmH
2
O
Temperature range
5 – 40 °C
Dead space volume inside the mask 114 ml
PROBLEM POSSIBLE CAUSES SOLUTIONS
• No air or insufficient
air comes out of the
mask
• Flow generator off
• Flow generator regulated wrongly
• Patient circuit tube not inserted
• Switch on the flow generator
• Regulate the flow generator
• Connect the tube to the flow generator
and mask
• The mask is noisy • Cushion incorrectly mounted,
air leak
• Mount the cushion correctly
• The mask does not
fit snugly on the
patient’s face
• Mask applied incorrectly • Check assembly of the mask and
headgear
ENGLISH • ENGLISH • ENGLISH • ENGLISH • ENGLISH • ENGLISH
10lingueRespireoN_NV822.110-.indd 9 25/01/13 11:21