Air Lift 57365, Руководство по установке, Страница: 8 / 28

LoadLifter 5000 Series
MN-1052
6
5. Grind the welds off the jounce bumper cups that attach them to the jounce bumper
frame bracket (Fig. 5). Remove and discard from both sides of the vehicle.
6. Grind the remaining welds flush to the frame (Fig. 6). Spray the frame with paint or
undercoating to cover the bare surface after grinding (Fig. 7).
7. Install the socket head M8 bolt (M) into the frame bracket (A) slot closest to the
flange on the bracket (Fig. 8). Cap with the nylon lock nut (O) as shown (Fig. 9).
The M8 bolt is used as a tool to ensure the upper bracket is aligned properly.
fig. 9 fig. 8
M
O
fig. 5
fig. 7 fig. 6
The bolt head points in the
same direction as the flange on
the bracket and is used
as a
line up tool only.
NOTE