Air Lift 57365 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 28

Air Lift 57365 Скачать руководство пользователя страница 2

IDENTIFYING THE DIFFERENCES BETWEEN KITS

Should you need to contact Air Lift customer service, you will need to know which kit you are inquiring about:
standard LoadLifter 5000, LoadLifter 5000 Ultimate or LoadLifter 5000 Ultimate Plus. The kits are easily
identifiable by looking at the roll plates and air lines.



Standard

LoadLifter 5000 — Zinc-plated steel roll plates and black nylon air lines.



LoadLifter 5000 Ultimate — Black powder-coated roll plates and black nylon air lines.



LoadLifter 5000 Ultimate Plus — Stainless steel roll plates, braided stainless steel air lines, stainless steel

air spring mounting hardware.

Air Lift offers two Ultimate Plus upgrade kits:

52300 - Braided stainless steel air line and fittings.

52301 - Stainless steel roll plates, air spring mounting hardware, braided stainless steel air lines and fittings.

LoadLifter 5000 Ultimate

black powder-coated

roll plate

LoadLifter 5000 Ultimate Plus

stainless steel

roll plate

LoadLifter 5000

silver zinc-plated steel

roll plate

LoadLifter 5000 Ultimate

nylon air line

LoadLifter 5000 Ultimate PLUS

braided stainless steel air line

LoadLifter 5000

nylon air line

«
1
2
3
4
...
»

Содержание 57365





























Отзывы:

Нет отзывов