Air Lift 57365, Руководство по установке, Страница: 6 / 28

LoadLifter 5000 Series
MN-1052
4
Introduction
The purpose of this publication is to assist with the installation, maintenance and
troubleshooting of the standard LoadLifter 5000, LoadLifter 5000 Ultimate or LoadLifter
5000 Ultimate Plus air spring kits. All LoadLifter 5000 Series kits utilize sturdy,
reinforced, commercial-grade single or double, depending on the kit, convolute bellows.
LoadLifter 5000 Ultimate kits add an internal jounce bumper and black powder-coated
roll plates. LoadLifter 5000 Ultimate Plus kits also have an internal jounce bumper, but
add stainless steel roll plates, air lines and air spring mounting hardware.
The air springs are manufactured like a tire with layers of rubber and cords that control
growth. LoadLifter 5000 series kits are recommended for most 3/4- and 1-ton pickups
and SUVs with leaf springs and provide up to 5,000 pounds of load-leveling support with
air adjustability from 5-100 PSI (.34-6.9BAR).
It is important to read and understand the entire installation guide before beginning
installation or performing any maintenance, service or repair.
Air Lift Company reserves the right to make changes and improvements to its products
and publications at any time. For the latest version of this manual, contact Air Lift
Company at
(800) 248-0892 or visit airliftcompany .com.
IMPORTANT SAFETY NOTICE
The installation of this kit does not alter the gross vehicle weight rating (GVWR) or
payload of the vehicle. Check the vehicle’s owner’s manual and do not exceed the
maximum load listed for this vehicle.
Gross vehicle weight rating: The maximum allowable weight of the fully loaded vehicle
(including passengers and cargo). This number — along with other weight limits, as
well as tire, rim size and inflation pressure data — is shown on the vehicle’s Safety
Compliance Certification Label.
Payload: The combined, maximum allowable weight of cargo and passengers that the
truck is designed to carry. Payload is GVWR minus the base curb weight.
NOTATION EXPLANATION
Hazard notations appear in various locations in this publication. Information which
is highlighted by one of these notations must be observed to help minimize risk of
personal injury or possible improper installation which may render the vehicle unsafe.
Notes are used to help emphasize areas of procedural importance and provide helpful
suggestions. The following definitions explain the use of these notations as they appear
throughout this guide.
INDICATES IMMEDIATE HAZARDS WHICH WILL RESULT IN SEVERE PERSONAL
INJURY OR DEATH.
INDICATES HAZARDS OR UNSAFE PRACTICES WHICH COULD RESULT IN SEVERE
PERSONAL INJURY OR DEATH.
INDICATES HAZARDS OR UNSAFE PRACTICES WHICH COULD RESULT IN DAMAGE
TO THE MACHINE OR MINOR PERSONAL INJURY.
Indicates a procedure, practice or hint which is important to highlight.
NOTE
CAUTION
DANGER
WARNING