Air Lift 57237, Руководство по установке

Страница: 6 / 20

MN-391
4
LoadLifter 5000
Installing the LoadLifter 5000 System
Item Part No . Description . . . . . . . . . . . . . . . . . . . . . Quantity
A 03102 Lower Bracket ........................2
B 07130 Upper Bracket ........................2
C 58496 2B6 Extended Bellows ...........2
D 11951 Roll Plate ................................4
E 10583 4.5” U-Bolt ..............................4
F 17159 3/8” x 1.5” WHFB ....................8
G 18435 Nyloc Nut ...............................16
H 18444 3/8” Flat Washer ....................24
I 18447 3/8” Large Flat Washer ...........8
J 21837 Swivel Head Elbow .................2
K 17203 3/8” x 7/8” HHCS ....................8
L 18427 3/8” Lock Washer ...................8
Air Line Assembly Parts
Item
Part No . Description . . . . . . . . . . . . . . . . . . . . . Quantity
AA 20086 Air Line Assembly ...................1
BB 10466 Tie Strap .................................6
CC 21230 Valve Caps .............................2
DD 18405 5/16” Flat Washer ...................2
EE 21234 Rubber Washer ......................2
FF 18411 Small Star Washer .................2
GG 21233 5/16” Hex Nut .........................4
HARDWARE LIST
Missing or damaged parts? Call Air Lift customer
service at (800) 248-0892 for a replacement part.
STOP!
THE AIR LINE MUST BE INSERTED INTO THE AIR FITTING OR THE AIR FITTING MUST
BE COVERED BEFORE DRILLING HOLES TO PREVENT ANY DEBRIS OR METAL
SHAVINGS FROM CONTAMINATING THE AIR FITTING.
GETTING STARTED
1. Raise the vehicle, remove the wheels, and obtain normal ride height (Figs. 2 and 3).
NORMAL RIDE HEIGHT: Normal ride
height (no load) is defined as the distance
between the bottom edge of the wheel-
well to the center point of the hub with
the vehicle in an “as delivered condition”
(without a load, i.e. tool box, camper,
etc.). Measurements should be taken
before beginning the installation. The
distance from the bottom edge of the
wheel well to the center point of the hub
should be recorded. All Air Lift kits are
designed to be installed and operated at
normal ride height.
CAUTION
fig. 2
fig. 3