MN-391
9
LoadLifter 5000
FIXING LEAKS
1. If there is a problem with the swivel fitting, then:
a. Check the air line connection by deflating the spring and removing the line by pulling
the collar against the fitting and pulling firmly on the air line. Trim 1” off the end of the air
line. Be sure the cut is clean and square. Reinsert the air line into the push-to-connect
fitting.
b. Check the threaded connection by tightening the swivel fitting another 1/2 turn. If it still
leaks, deflate the air spring, remove the fitting, and re-coat the threads with thread sealant.
Reinstall by hand tightening as much as PSIle, then use a wrench for an additional two
turns.
2. If there is a problem with the inflation valve, then:
a. Check the valve core by tightening it with a valve core tool.
