Air Lift 57237 Скачать руководство пользователя страница 16

MN-391

14

LoadLifter 5000

Choosing the Right On-Board Air Compressor System

Add an on-board air compressor sytem to inate and deate your air 

springs automatically or with the touch of a button — from inside or 
outside of the vehicle .

•  For convenient, on-the-go control of your air springs, add an Air Lift on-board air 

compressor system. 

•  Air Lift on-board air compressor systems eliminate the search for gas stations that 

have a working compressor, saving you time, energy and money. 

•  All systems include a compressor, controller 

and all parts needed for easy installation.

1.  Choose single or dual path ination 

 

(see illustrations at right)

2 .  Choose wireless, analog control or automatic

•   Wireless: Control your air springs from 

inside or outside the vehicle. Easiest 
installation — no wires to the cab.

•   Analog: In-cab control of your air springs. 

Economically priced.

•   Automatic: Self-leveling system, keeps the 

vehicle level no matter what.

3 .  Choose heavy or standard duty compressor

 • Standard duty: A standard duty compressor 

will work well for most customers who use 
their system on an intermittent basis. 

  •  Heavy duty: For daily use, consider the  

heavy-duty compressor — it inflates faster and 

more quietly than the standard compressor.

Single path systems Two springs will 

inate at the same time. Good for loads 

that are evenly distributed from left-to-
right or front-to-back.

Dual path systems Air springs are 
controlled separately to allow for different 
air pressure from side-to-side. Perfect for 
uneven or top-heavy loads.

W I R E L E S S

DUAL PATH

SINGLE PATH

A N A L O G

DEFLATE

RIGHT

DEFLATE

LEFT

INFLATE

BOTH

WirelessAIR

 

TM

WirelessONE

 

TM

LoadCONTROLLER

 

TM

Dual

Single

LoadCONTROLLER

 

TM

DEFLATE

BOTH

INFLATE

BOTH

•  Easy installation
• Includes  

heavy-duty  
compressor

Compact, 
economically priced 
control. 

Compact, 
economically priced 
control. 

•  Easy installation
•  Includes standard-

duty compressor

P/N Standard Duty Compressor 
25852; P/N Heavy Duty Compressor 25856

P/N 25870

P/N 72000

SmartAIR

TM

 II

•  Easy installation
• Automatic  

self-leveling system

•  No in-cab controls 

required

Single Path P/N 25490,  
Dual Path P/N 25491

A U T O M A T I C

Visit www .airliftcompany .com for more detailed info on compressor systems.

P/N Standard Duty Compressor 
25850; P/N Heavy Duty Compressor 25854

Содержание 57237





















Отзывы: