July, 2016
11
POWER HOOK UP
Remove Money Box Face plate on 1200 Series
1. Remove two bolts holding the seam cover located below the Money Box face
plate at the bottom of the machine.
2. Two of the bolts are in the control box where the coin boxes set.
Remove locks and money box face plate. Remove coin boxes bolts are located
behind the coin boxes. Refer to Basic Maintenance for lock removal.
3. Run the power wire from the stub up through the hold provided at the bottom
of the unit. (See wire size guide on page 7)
4. Splice the power wire and the three wires from the unit together. Splice the same
color wires together. If you are unsure which wires to splice call a qualified electrician.
The use of wire nuts for splicing is strongly recommended.
5. To replace the seam cover reverse step one.