July, 2016
10
BASIC MAINTENANCE
1. Removal of Money Box 1200 Series Vacuum
A. Remove the two medeco plug locks with keys on front of the money box
face plate, rotate lock counter clockwise until you hear a click, pull lock
completely out. Use a 5/16 allen wrench to loosen bolts where the locks
were, turning bolts counter clockwise. When bolts are loose remove the
money box faceplate. Coin box or boxes are sitting behind faceplate.
2. Reinstall Money Box 1200 Series Vacuum
A. Replace coin box or boxes in unit, place money box face plate back into
position using 5/16 allen wrench line up bolts and tighten. Replace
medeco plug locks. Turn locks clockwise half of turn until they click.
Remove keys unit is now secured.
3. Cleaning Out Refuse Area 1200 Series Vacuums
A. Refuse area must be cleaned periodically. Refuse area is located behind
lower door on unit. If refuse is caught in the filter bags close lower door
and open top door and shake bags until refuse drops. Finish cleaning
out lower refuse area.
4. Dome Removal 1200 Series Vacuums
A. The dome is held on with four allen head screws. When the screws are
removed the dome may be lifted straight upward and off the unit.
5. Cleaning Exterior of the 1200 Series Vacuums
A. To remove scratches, paint, and dirt use soap and water or a cleaning
solution. Use a nylon scouring pad such as a scotch brite and rub with the
grain of the metal. Do not use steel wool and do not scrub decals.