
20
1. Use a flathead screwdriver to pry the spark arrester
out from the muffler.
2. Remove the carbon deposits on the muffler screen
and spark arrester using a wire brush.
FIG.35
3. Install the muffler screen.
TROUBLESHOOTING
ENGINE WON’T START
1. Fuel system
No fuel supplied to combustion chamber.
No fuel in tank….supply fuel
Fuel in tank…. fuel cock knob to
ON
Clogged fuel line….clean fuel line
Clogged carburetor….clean carburetor
2. LPG system
There is no gas in the combustion chamber
The gas tank is empty ……change to a full tank
The carburetor is clogged……clean the carburetor
3
.
Engine oil system
Insufficient
Oil level is low….add engine oil
4. Electrical systems
Poor spark
Spark plug dirty with carbon or wet….remove carbon or wipe spark plug dry
Faulty ignition system….contact AIMS Power
5. Compression insufficient
Worn out piston and cylinder….contact AIMS Power
NO OUTPUT POWER
Safety device (AC) to “OFF” …stop the engine, then restart
Safety device (DC) to “OFF” …press to reset the DC protector
FIG.35