15
The economy control switch must be turned to
OFF
when using electric devices that require a large
starting current, such as a compressor or a
submergible pump.
FIG 24
2
．
OVERLOAD INDICATOR LIGHT
FIG.25
The overload indicator light will blink when the rated load
is exceeded. Reduce the loads to its normal range and
the overload indicator light will turns off. When the
maximum load is reached, output pilot light will turn off,
the overload indicator light will turn on and cut power to
the receptacles. To reset the output:
(a) Turn off any connected electric devices
(b) Reduce the total wattage of connected electric.
(c) Check for blockages in the cooling air inlet, muffler
air exhaust pipe opening and the control unit.
(d) After inspection, press the reset button to restore
the power:
FIG.26
CAUTION
The generator AC output automatically resets when the engine restarted.
The overload indicator light may come on for a few seconds at first when using electric
devices that require a large starting current, such as a compressor or a submergible pump.
This is not a malfunction.
FIG.25
FIG.24
FIG.26