AIMS Power GEN3850W120VD, Руководство пользователя, Страница: 13 / 23

13
WARNING:
If the engine switch is held down in the “start” position longer than
5 seconds, it could damage the starter
6. Warm up the engine.
7. Push the choke back to the
RUN position.
FIG.20
8. Warm up the engine without a load for a few
minutes.
Electric Start
1. Shift the fuel selector switch to GASOLINE
position. FIG.16 (page 12)
2. Turn the battery switch to “
ON
”, the LED indicator
will light. FIG.16 (page 12)
3. Pull the choke to the START position. Not
necessary if the engine is already warm.
4. Turn the engine switch to the RUN position.
FIG.21
5. Press and hold the engine switch to the “ START ”
position. Release as the engine begins to start. If
the engine fails to start within five seconds, release
the switch and wait at least ten seconds before
attempting to start the engine again.
FIG.22
6. Push the choke lever back to the RUN position.
7. Warm up the engine without a load for a few minutes.
RUNNING WITH LPG
Recoil Start
1. Shift the fuel selector switch to LPG position. FIG.16 (page 12)
2. Turn the battery switch to “ ON ”, the LED indicator will light. FIG.16 (page 12)
3. Connect the reducing valve to the LPG tank first, then insert the reducing valve tapered joint
into the LPG quick connect.
4. Open the
LPG
tank valve, testing for leakage.
5.
Pull the choke out to CHOKE position. FIG.18 (page 12)
FIG.21
FIG.22
FIG.20