Aimco UDBP-T40, Инструкция по эксплуатации

Страница: 5 / 20

- 5 -
1. Proper fastening time
・
Battery pulse tool will allow tightening an average of 6 cycles
per minute when averaged on a B joint. Softer joints will require
less aggressive duty cycles.
・
Temperature protection will function to stop the tool when motor
heats due to exceeding duty cycle.
2. Operation at low temperature extremes
・
The tool operates using a pulse unit containing hydraulic fluid.
Should tool be left for extended periods at temperatures below 5°C,
the tool may not deliver tightening force initially. This can be
remedied by cycling the tool repeatedly on a test fixture which will
preheat the pulsing unit to an operating range.
3. Cautions for operation
・
Always maintain good posture during operation.
・
Be sure to keep materials away from rotating parts of the tool at all
times.
・
Avoid wearing loose clothing or accessories like necklaces when the
tool is in use.
・
Insure that operators are trained on the tool and hold it securely
during operation.
・
Unless otherwise necessary, do not run the tool off an application for
long periods of time.
・
Do not touch the trigger when you carry the tool to avoid accidental
start.
・
Insure that operators are alert and rested when working with the tool
to eliminate potential injury from fatigue.
・
Make sure to confirm rotating direction before you operate the tool.
・
Do not give the tool shock by drop or throw handling. Reckless
handing will result in accidents or breakage.
CAUTION