Aimco UDBP-T40, Инструкция по эксплуатации

Страница: 12 / 20

- 12 -
Handle Operation
５ ５ ５ ５
Changeable Fwd/Rev Lever (if desired)
１）
Remove allen bolt (use 2mm hexagon bar spanner).
２）
Pull reverse lever forward to remove it.
３）
Change the position and push it back to the tool.
４）
Put glue (#221 LOCTITE is recommended) to thread of allen bolt and fix reverse
lever to the tool by fastening the allen bolt by fastening torque 0.3~0.5Nm.
６
６ ６
６
Battery gauge LED
Battery gauge LED will light for about 3 seconds first and then indicate the
remaining capacity when you press the trigger or attach the battery to the tool.
Battery gauge display while in use
Capacity (%) LED
Less than 10
Maintains red lamp lighting after
shut-off, and goes off
10~20 Red
21~40 Yellow
41~100 Green
Battery error Red and yellow by turns
Battery
Pull forward
Reverse lever
Battery gauge LED
（Ｒ） （Ｌ）
（Ｌ） （Ｒ）
Ｒ：
Forward
Ｌ：
Reverse
Remove allen
bolt