Aimco UDBP-T40, Инструкция по эксплуатации

Страница: 15 / 20

- 15 -
Attach
Jaw
Remove
Battery and the charger
Charge brand-new battery completely before
first use of the tool. Suspension of battery charging
prematurely can cause the LED to incorrectly
display remaining capacity (
＊
2).
(
＊
2): Charge the battery full 2 to 3
times and the display will get back to normal.
１ １ １ １
Attach and remove battery
Attach
・・・
Slide it until it gives out click sound.
Remove
・・
Slide it to your side while pressing down the Jaw.
２
２ ２
２
Charge
Insert battery to bottom of charger, wait until LED displays Full charged.
Insert power cord plug to the bottom with socket.
Use charger by specified power source.
Do not charge battery below 0 or above 40 .
℃ ℃
Doing so can cause explosion or fire.
LED Display Status
(
＊
3): Wait for regular charging to start. (
＊
4): Replace the battery with a new one.
Charging time
Battery capacity (%) Time (about minute)
80 40
100 64
To the bottom
(Red)Slow flashing
(Orange)Slow flashing
(Green)Slow flashing
Full charged
Charging
90
～
99
％
80
～
89
％
0
～
79
％
Charging error
80
～
89
％
90
～
99
％
0
～
79
％
Preliminary Charge
Standby for
Temperature Protection
Charging: capacity 0
～
79
％
Charging: capacity 80
～
89
％
Charging: capacity 90
～
99
％
(Red)
(Orange)
(Green)
Waiting: capacity 0
～
79
％
Waiting: capacity 80
～
89
％
Waiting: capacity 90
～
99
％
Preliminary charging
＊
3)
Battery error
＊
4)
Charge finish
(Green)Flashing
DANGER
DANGER
DANGER
(Red, Orange)Quick flashing
(Red)Quick flashing