Aimco UDBP-T40 Скачать руководство пользователя страница 10

Страница: 10 / 20

- 10 -

Handle Controls

１

Select rotating direction (factory supplied lever orientation)

Set LEVER to R

：

Forward

Set LEVER to L

：

Reverse

２

Press trigger

）

Speed increases in 3 steps as you press the trigger progressively for both

forward and reverse.

）

Release your finger from the trigger, and the brake will work to stop the

tool.

３

Fastening

・

Fastening torque does not reach preset torque if you

release trigger prior to automatic shut-off.

・

Do not cover slit when the tool is in use.

Doing so will restrict tool ventilation.

・

Temperature protection

The tool will stop rotation with shut-off LED lamp
lighting in red

when the temperature gets high.

Do not use the tool for

approxiately 30 minutes.

Confirm the temperature

has cooled. Restart after the temperature has
reached room temperature.
Guideline of temperature protection
Temperature protection will implement if duty cycle

Is greater than fastening 6 fasteners with a max
0.4 seconds fastening time on B-joint fasteners.

0.4 second each

Stop

Trigger

Reverse lever

Shut-off LED

Slit

Keep pressed

LED         Status
Green       OK
Red          Protected

SHUT-OFF LED LAMP

Содержание UDBP-T40





















Результаты поиска

Содержание UDBP-T40

Отзывы:

Бренды по названию

Популярные бренды

Aimco UDBP-T40, Инструкция по эксплуатации

Результаты поиска

Содержание UDBP-T40

Отзывы:

Бренды по названию

Популярные бренды