4
READ BEFORE USE
Set-Up
•
Use the AM Controller in an
indoor, dry place that has no
dust or iron grindings.
•
Position the AM Controller on a
stable surface to avoid falling
caused by vibration.
•
Keep the AM Controller away
from high-voltage sources and
noise-generating sources to
avoid electromagnetic
interference.
•
Do not place objects on the top
of the AM controller. Keep
surroundings clear to allow heat
dissipation.
Caution During Operation
•
Use the power supply only on an
AC circuit with an overload relay.
•
The plug of the power cord is
attached with a ground pin.
Ensure the ground pin is
connected to a socket equipped
with a ground circuit to avoid
electric shock.
•
Ensure the power cord is tightly
plugged into the socket.
•
Hold plug firmly when plugging
in or unplugging cord that
connects the AM Controller to
the screwdriver. Do not pull on
the cable; doing so could cause
a short circuit.
•
Ensure that the connecting
cable to the screwdriver and the
AM Controller is aligned
properly with the guide slot
before inserting (this may
require force). Twist to fix the
connection. This will reduce the
occurrence of cord breakage
due to drag.
•
Do not suddenly switch between
forward and reverse when the
electric screwdriver is in operation.
•
We recommend that you use
80% or less of the rated
maximum torque to avoid
inaccurate clutch escape.
Maximum torque may vary with
the flexibility of the fastened
object. If your application
requires more than 80% of the
rated maximum torque, using a
screwdriver with higher torque
is recommended.
Safety Notice
•
Stop using the product if there
is any unusual noise or smell.
Turn off the power immediately
and contact your AIMCO
service center.
•
Keep the two-stage switch in
the OFF position when the
controller is not in use. If the
controller will not be used for an
extended period of time,
disconnect the plug from the
power-source socket.
•
The AM Controller is designed
only for use with Electra Series
electric screwdriver. Do not use
it with other tools.
CAUTION
Output terminal 5P-5P Needle No. 1
is “-” potential, and No. 4 is “+”
potential.
Содержание AM-45
Страница 25: ...25 Assembly Drawing ...
Страница 27: ...27 ...