RC240 3D Mouse Presenter
V1.2
15
You may modify the Hotkey codes by clicking the “Load” button to select
one of the Motion Key Map files.
aimMaster™ Pro
supplies some Motion
Key Maps files.
Use the Motion keys
Before using the Motion keys, the 3D Mouse should be disabled (the light
of
LASER key is turned OFF).
Press & hold the RIGHT key, an OSD (On Screen Display) is shown on the
screen. You will see 8 blocks with the command letters that were entered
in the description column of the Hotkey Setting dialog. Hold the RIGHT key
and move the cursor towards the direction of the command you want to
execute. When the cursor is moving out the OSD area, the selected
command block is highlighted. Release the RIGHT key. The Hotkey code
is sent out and the application will respond with this code.
Example 1:
When you move the cursor (still hold the RIGHT key) to up position, the
“Black” block will be highlighted. Release the RIGHT key, the screen will
go black immediately.
