Aim ANET1553-1, Руководство пользователя

Страница: 24 / 57

16 ANET1553
Users
Manual

Mode
: Set to ‘
Managed
’
if you want to connect to a network with a central
wireless access point. Use ‘
Ad-
Hoc’
(also called IBSS), if you want to join a
peer-to-peer network without central access point.

ESSID : This is the alphanumeric ID of the wireless network, the ANET1553
device shall connect to. In ‘
Managed
’ mode, the AP defines this ID. In ‘
Ad-
Hoc’
mode, all participants of the peer-to-peer network must agree on the
same ESSID.

Security : Wireless networks use different security methods to protect against
unauthorized access. Use
‘Unsecure’
if the network you want to join does not
use any security mechanism. Choose
‘WEP’
if the wireless network is
protected with Wired Equivalent Privacy (WEP). Last supported security
method of the ANET1553 device is Wi-Fi Protected Access II using a pre-
shared key, which can be configured by using ‘
WPA2-
PSK’
. Please note that
WPA is not supported in Ad-Hoc mode.

Password/Key: If the wireless network uses any of the security methods
mentioned above, except Unsecure , it is necessary to enter the password/key
for the network. In WEP mode, the key can be in ASCII (5 or 13 characters) or
Hexadecimal format (10 or 26 digits). WPA uses only passwords in ASCII
format which must contain at least 8 characters.