Aim ANET1553-1, Руководство пользователя

Страница: 19 / 57

ANET1553 Users Manual 11
3
GETTING STARTED
This chapter describes the configuration, maintenance and update of the ANET1553
and how to use the ANET1553 from a customer application and with AIMs PBA.pro.
3.1.1 Requirements
The configuration of the ANET1553 module is via web application hosted by the ANET
and therefore Operating System independent. A web browser needed on your system
in order to run the ANET configuration application. The ANET configuration has been
tested with Microsoft Internet Explorer, Mozilla Firefox and Google Chrome. It is
recommended to always use the latest version of the respective browser.
3.1.2 Integration in a Network
This section describes how to attach ANET1553 modules to your network.
The procedure depends if your network provides a DHCP server or not. How to proceed
is described in the following chapters.
3.1.2.1 The Network provides a DHCP sever
Just plug the ANET1553 module to a free port of an Ethernet switch that is attached to
your network. Any standard twisted-pair cable with RJ45 plugs can be used. The DHCP
server will automatically assign an IP-Address for each ANET1553 in a network.
3.1.2.2 The Network does
n’t provide a DHCP sever
Either the ANET1553 has a direct connection between an Ethernet port of a PC or is
connected to a Ethernet Network via a Switch
Both, the ANET1553 module and the configuration system (e.g. PC), should be
powered off before the connection is established. Any standard twisted-pair cable with
RJ45 plugs can be used for the direct connection.
The network interface of the configuration system connected to the ANET1553 (i.e. a
PC or any other System with an Ethernet-Port) must be configured to automatically
obtain an IP. The OS will then assign a link-local IP address in the range from
169.254.0.0 to 169.254.255.255 for the configuration system (e.g. a PC).
Now first power on the ANET1553 module, followed by the configuration system (e.g.
PC) power on. After the OS has been booted, you should check if the
configuration
system obtained an IP address in the range from 169.254.0.0 to 169.254.255.255.
For example, if Windows is used, open a command console and run ipconfig.
For assigning a specific IP-Address see chapter 3.1.4.1.