Manual ROG - ROLL’N’GRILL
®
Cleaning
Translation
Last change: 2020-02-27
Technical details are subject to change.
Version: 4.0
Page 28 / 39
9.2
Grill rollers and components
The last grilling operation has been completed and the food products to be grilled have been removed
from the unit.
1.) Press the HEAT OFF key to start cleaning mode.
The heating switches off.
The grill rollers stop.
The HEAT OFF control LED flashes fast.
The cooling phase starts. It can differ depending on the ambient temperature.
2.) As soon as the HEAT OFF control LED starts flashing slowly, press the HEAT OFF key one more time.
The grill rollers turn at their highest speed level.
Coarse dirt is scraped off the grill rollers.
The cooling phase continues.
3.) When the HEAT OFF control LED is continuously lit, cleaning can start.
!TIP: The grill rollers of the ROG - ROLL’N’GRILL
®
are easier to clean while they are still slightly warm.
WARNING!
Burning hazard
Contact with hot surfaces can cause burn injuries.
• Observe sufficient cooling time.
• Wear gloves.
CAUTION!
Damage to the unit as a result of too fast cooling
Hot components must not be cooled down. Cold media such as ice or ice water can
make the components burst.
• Observe cooling phases. Mind the control LED.
