AIC N 150 WH Скачать руководство пользователя страница 17

Страница: 17 / 84

U-17

F-084392_EN • B

nstructIons

for

the

ser

Safety Instructions for the User

This appliance can be used by chil-

dren who are at least 8 years old and

by persons with reduced physical,

sensory or mental capabilities or lack

of experience and knowledge, provid-

ed that they are under supervision or

have been given instructions concern-

ing the use of the appliance in a safe

way and that they understand the haz-

ards involved.

Cleaning and user maintenance shall

not be performed by children without

supervision. Children shall not play

with the appliance.

For safety reasons, we recommend

that smoke and carbon monoxide de-

tectors are installed in the living areas

of your building according to the ap-

plicable local regulations.

If smoke is present, shut down the ap-

pliance, ventilate the room and exit the

building. Then call your installer to in-

vestigate and solve the problem.

Do not store any fl ammable, corrosive or

explosive products near the appliance.

Do not modify or deactivate any compo-

nent, nor any safety device in the system.

Do not operate the appliance when

the casing is open.

IF YOU SMELL GAS:

→

DO NOT:

Use an open fl ame

Smoke

Use electrical devices (phones,

doorbells, etc.) or switches

→

DO:

Close the gas supply

Open all doors and windows to ven-

tilate the room

Inform your neighbours of the dan-

ger by knocking at the doors.

Get out of the building

Call your installer or gas company

Do not modify or block the

condensate outlet(s).

Do not open any sealed part

or component. Failure to

comply with this instruction

can result in damages and/

or injuries.

The sight glass can be very hot when

the appliance is in operation. Do not

touch the sight glass or its immediate

surroundings.

Make sure that the appliance and the

heating system are prevented from

freezing.

In case of water leakage, disconnect

the appliance from the power supply

and gas source, turn oﬀ the water sup-

ply and call a qualifi ed professional.

Do not modify any part of

the electrical system or ac-

cess internal components.

Do not touch the appliance with any

wet body parts when the appliance is

supplied with electrical power.

Содержание N 150 WH





















































































Результаты поиска

Содержание N 150 WH

Отзывы:

Бренды по названию

Популярные бренды

AIC N 150 WH, Руководство по установке и обслуживанию

Результаты поиска

Содержание N 150 WH

Отзывы:

Бренды по названию

Популярные бренды