24
Aibot X6 V2, Operation
3.1.4
Assembly of the system
Inserting the
batteries
Always operate the Aibot X6 V2 with two batteries.
To insert the batteries, follow the steps below:
1) Rotate the battery cover anticlockwise. If necessary, loosen (but do not
remove) the 3 hex head screws using a 2.5 mm hex key wrench. Lift the
battery cover to open the battery compartment.
2) Loosen the strap fastener.
3) Insert the batteries and tighten the strap fastener.
4) Connect the batteries with the Aibot X6 V2.
5) Make sure the batteries are firmly connected.
6) Reattach the battery cover. If necessary, loosen (but to not remove) the 3
hex head screws using a 2.5 mm hex key wrench.
7) Rotate the battery cover clockwise to close the battery compartment. If
necessary, tighten the 3 hex head screws to fasten the battery cover to the
Aibot X6 V2.
