background image

12

Aibot X6 V2, Safety Directions

Precautions:

Be aware of the downwash of your own rotor blades when flying near 
ground. 

DANGER

Crash due to weak batteries at low outdoor temperatures.

At low outdoor temperatures, the batteries cannot provide their full energy. 
Risk of serious injuries and damages because of falling device. 

Precautions:

Respect the general limitations.

Keep batteries warm before operating the device at low outdoor tempera-
tures. 

Be aware of shorter flight times at temperatures below 10

 

°C OAT. 

DANGER

Crash due to overheating motors or electronics

At high outdoor temperatures, the motors or parts of the electronics can over-
heat. Risk of serious injuries and damages because of falling device. 

Precautions:

Respect the general limitations.

Shorten your flights at temperatures above 30 °C OAT.

Maintain a cool-down phase between flights.

Do not store the system in direct sunlight.

Land immediately if a temperature warning appears.

DANGER

Crash due to mental fatigue of the operator

The operation of the Aibot X6 V2 causes considerable mental fatigue. Failure 
to observe these precautions may cause the operator to lose concentration 
and lead to an accident. 

Precautions:

Do not fly longer than two hours without taking a rest.

Do not fly with poor health.

DANGER

Hazards due to glaring sun

The glaring sun can compromise your eyesight and may lead to an accident. 
Also a permanent view to the sky on a bright day may stress your eyes. 

Precautions:

Do not fly longer than 2 hours without taking a rest.

Always have sun glasses with you, to protect your eyes against the 
sunlight.

If possible, consider the position of the sun when choosing the position of 
the operator. Make sure that no glare occurs during the mission.

WARNING

Overheating Batteries

Risk of explosion or fire. 

Precautions:

Protect batteries against high temperatures.

Always use the provided battery charger.

WARNING

Short circuit of battery

Risk of fire, electric shock and damage. 

Precautions:

Do not open the battery housing.

Keep away any metallic or wet objects from the battery connectors.

Содержание Aibot X6 V2









































































Отзывы: