manualshive.com logo in svg

AIBOTIX Aibot X6 V2, Руководство пользователя, Страница: 40 / 72

Поделиться
Скачать
AIBOTIX Aibot X6 V2 Скачать руководство пользователя страница 40

40

Aibot X6 V2, Operation

3.4.6

GPS Cage

CAUTION

Sensors may provide wrong data

A malfunction may occur if the environmental information is inconsistent or not 
comprehensive. The functionality of some Safety Features relies on the infor-
mation of one or more of the following sensors: Pressure Sensor, Ultrasonic 
Sensor, GPS, Magnetic Compass.

Precautions:

•

Be aware that sensors may provide wrong data and always be ready to take 
over manual control.

Safety Features

The Aibot X6 V2 has a GPS cage mode for training purposes. In GPS cage mode, 
a virtual cage around the Aibot X6 V2 is built. The cage is specified by a radius, 
minimum altitude and maximum altitude above ground. The Aibot X6 V2 does 
not leave the cage during the flight execution. Refer to the AiProFlight user 
manual for more information. When GPS cage mode is activated, the motors 
will only start if the GPS toggle switch is positioned to PH.

This is a support function for the operator. Nevertheless you have the sole 
responsibility for the flight as a whole. 

a) Radius
b) Maximum altitude
c)

Minimum altitude

d) Ground

c

b

a

d

08786_001

Содержание Aibot X6 V2









































































Отзывы:

Нет отзывов