AI 2.4G&AI-BS-WS40-V, Руководство пользователя

Страница: 5 / 27

5
/
27
Notice
☆
:1. For the setting of the non-quick setting command, it is necessary to scan into the setting
command first, and then scan the corresponding parameter setting instruction and finally
scan the saving and exit setting instruction.
3. If in setting state, scanned the setting bar code, the system will identify as invalid barcode, low sound
alarm, invalid alarm belongs to the normal situation.
4.
To set the type of barcode
4.1 Pairing
★
Function Command Barcode Remark
Enter setting
@.WN-T-A0001
/
Power off when pairing
failed.
When the pairing is
successful, the engine to
continue running.
Discharge
pairing
@.WN-T-A0000
/
Discharge pairing
Notice
☆
:1
、
The pairing effective time is 20 seconds from the start of the receiver's power-on (the LED is
flashing). After 20s, the LEDs are always on and cannot be paired. (This method is for a
receiver without a button)
2
、
Press buttons on the receiver, the receiver will automatically enter the matching state, during
this period can be paired normally. (with button this way for receiving).
3
、
2.4G stops flashing after pairing is successful, and 433 stops flashing after 20S is turned on.
4.2 HID-KEYBOARD Language setting
★
Function Command Barcode Remark
@SET
*USA WN-W-B1000 *USA
FRENCH WN-W-B1001 FRENCH
GEMRAN WN-W-B1002 GEMRAN
TUKISH WN-W-B1003 TUKISH
BELGIUM WN-W-B1004 BELGIUM
BRAZIL WN-W-B1005 BRAZIL
CRZCH WN-W-B1006 CRZCH
SPANISH WN-W-B1007 SPANISH
@END
Note
★ ：
This setting is valid for both the receiving end (Tx) and the transmitting end (Rx). If
multi-language is set when the wireless transmission connection is disconnected, the