AI 2.4G&AI-BS-WS40-V, Руководство пользователя

Страница: 10 / 27

10
/
27
4.9 The command of firmware upgrade
Function Command Barcode Remark
@SET
Receiver
upgrade
WN-R-K0000
1. The receiver is connected to the
PC via USB, and in the case of
pairing, after the scanner scans the
barcode, the receiver reinserts the
receiver after receiving it.
2. The receiving socket is
connected to the PC through the
RS232 serial port, and after the
scanner scans the barcode, the
receiving end is re-plugged after
receiving the barcode.
3. The receiving socket is
connected to the PC through the
serial port, and the system enters
the upgrade mode after pressing
the bottom button for 8 seconds.
Sender
upgrade
WN-T-K0000
1. Connect the PC through the USB
cable, then scan the upgrade
barcode of the sender, and then
restart the device to detect the
upgrade.
@END
4.9 0x0A 过滤
开启会过滤 掉字符串中 间 的 0x0A( 换 行符),字符串 结 尾(倒 数 第一和第二位)的 0x0A 不 会 被 过滤 。
功能 指令 条码 备注
*开启 0x0A 过滤 @.WN-W-F3301/
开启后,字符串中间
的换行符 0x0A 会被
过滤,
关闭 0x0A 过滤 @.WN-W-F3302/
关闭后数据中间如
果有换行符,会正常
输出
4.10 Wireless connectivity detection(
★
Note: this function only in a scanner connected to a
receiver)
Function Command Barcode Remark
@SET
Enable
connection
WN-T-C0001
This setting only in a scanner
connected to a receiver