AI 2.4G&AI-BS-WS40-V, Руководство пользователя, Страница: 4 / 27

4
/
27
scan one or more Settings
（
3
）
Scanning
：
scan “@END”.
（
4
）
Some functions can be set directly. such as “pairing”, “discharge pairing”
3.2 The data format of setting command
Table 3.3-1 The data format of setting command table①
Prefix Target Type Parameter
WN- T-/R-/W-
Reference the data format
of setting command table
*****
Note ①The format does not include access Settings and save exit setup instructions.
3.3-2 Setting mode format and data analysis
Format Data Description
Prefix WN- The Fixed prefix characters
Target T-/R-/W-
T-: It means the setting barcode work on the receiver
directly
R-: It means the setting barcode work on the receiver
directly, The setting barcodes of the receiver need to
be forward by the sender through wireless
transmission
W-: work on the sender and the receiver at the same
time
Type Consult the table of setting type
Parameter The parameter is four characters in the range “0-9”
3.4 Setting type
3.4-1 The table of setting type
Type Description
A Wireless pairing/discharge pairing
B Language settings
C Check the Firmware info/Change the frequency
D Auto trigger switch
F
Real-time mode /Inventory mode /Data operation for Inventory
mode
G Sleep times
H Restore the factory settings
I Data transfer form\Prefix mode setting\Custom end symbol
K The sender/receiver firmware update command
L USB Wired output switch
3.5 “Enter setting”and“Save&Exit”
Command
：
Function Command Barcode Remark
Enter setting @SET
Enter setting mode
，
For 20 seconds
time effectively
Exit & Save @END Exit & Save